Prod.No. 93364 EAN: 4007529933648 Indoor 180-KNX-DX covering not included
- Voltage: via KNX BUS
- Dimensions: (covering not included) 70 x 70 x 61 mm
- Typ. power input: 12 mA
- Features
- Description
- Accessories
- Downloads
Features
| Designation | Value |
|---|---|
| Voltage | via KNX BUS |
| Dimensions | (covering not included) 70 x 70 x 61 mm |
| Typ. power input | 12 mA |
| Detection area | horizontal 180° (Wall mounting) |
| Range |
max. 10 m across max. 3 m towards |
| Monitored area (tangential movement) | 150 m² / 1.1 m mounting height |
| Mounting height min./max./recommended | 1 m / 2.2 m / 1.1 m |
| Degree / class of protection | IP20 / Class III |
| Impact strength | IK05 |
| Temperature measurement range | -5 °C to +45 °C |
| Ambient temperature | -25 °C to +55 °C |
| Housing | polycarbonate, UV-resistant |
| Number of light sensors | 1 |
| Material color | - |
| Number of PIR sensors | 1 |
| KNX TP 256 | Yes |
| Orientation light | 5 – 100 % / OFF / 1 min – 255 min |
| Night light | 5 – 100 % |
| Brightness set value | 5 – 2000 Lux |
Description
KNX occupancy detector with integrated KNX bus coupler, especially for installation in walls
1 x Light (for regulating or switching), 1 x slave output, 3 separate HVAC-blocs
Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
Two logic modules
Individual adaption of the PIR sensor sensitivity
Measuring of mixed light thanks to internal light sensor
Various locking functions
Status LEDs can be activated / deactivated
Programming button (phys. address) can be operated via remote control
Regulation/switching of three light groups via offset (external influence possible)
Short presence, self-adjusting follow-up time, corridor function
Recall of light scenes
Temperature- and noise sensor
HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
5 button remote control, programmable at choice (accessory)
Occupancy simulation
Detection area can be extended thanks to master-slave-mode
Extensive optimization options for light measurement
Measured light value is communicated to the bus
IR remote control-capable via IR remote control (optionally)
PIN code
Manual influence via external KNX push buttons possible
Function control (heartbeat, cyclical sending)
Forced switch-off
Intelligent central-off function
Premonition of switch-off
Behaviour upon bus voltage return definable at choice
Variable safety pause after switching off the lights
Settings ex ETS 4 for integration in KNX systems
The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
Adaption of dimming curve
Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
Burn-in function for fluorescent lamps selectable from 1h till 100h
Soft-start
Blinds
For use with covering (interior cover dimensions 50 x 50 mm) in 5 different colours
In combination with centre plates usable with current frame systems of various manufacturers
B.E.G. frames and centre plates for combination with other frame systems available
Please order cover frame separately, available in various colours
Application examples:
underground car parks, entrance halls, corridors/hallways, staircases, toilets, equipment rooms
Product alternatives
Follow us: