BMS B.E.G. Brück Electronic GmbH

BMS

Multi-sensors and push-buttons as input devices

BMS B.E.G. Brück Electronic GmbH

For use in compatible lighting control systems

B.E.G. now offers a large number of the “occupancy detectors” as BMS multi-sensors. The advantage of BMS multi-sensors over the classic connection of 24 V multi-sensors is that the 2-wire DALI cable that is often already available or planned for lighting can be used for the connection. The simplification is enormous: whereas a con-ventional 24 V multi-sensor often required an individual terminal per sensor and an individual
supply line, a large number of BMS sensors can be connected to one line, depending on the DALI voltage supply. DALI luminaires and multi-sensors simply share the BUS line.

ensor information such as movement, presence and light values are transmitted by the BMS multi-sensors even without cyclical polling in “multi-master” mode. This sensor information is standardised. This means that the B.E.G. BMS multi-sensors can be used with all multi-mastercapable application controllers that support multi-sensors according to IEC 62386 parts 101, 103, 303 and 304.With state-of-the-art digital passive infrared sensors, the detectors offer unique detection quality for motion and presence. B.E.G.‘s light measurement is also particularly reliable thanks to external light sensors and allows constant light regulation up to 16 m mounting height with the PD4-BMS-GH, for example. The BMS family offers detectors for almost all areas of application, for example the “PICO” mini-sensor with an installation depth of only 11 mm, the super-flat PD11 sensor or the PD4-BMS-GH high-bay detector.

BMS B.E.G. Brück Electronic GmbH

Features

  • DALI-2 control devices of the class “Input Device” developed according to IEC 62386 parts 101, 103, 301, 303 and 304
  • Multi-sensors and push buttons via DALI
  • Lighting control takes place in a centralised multi-master compatible application controller from any manufacturer
  • Operating voltage via DALI BUS
  • Large range for a wide variety of requirements
  • Multi-sensors:
    – Bright LED indication for rapid localisation
    – Exterior light sensors, some are orientable
  • Commissioning and maintenance by systems integrator of lighting control solution installed
BMS B.E.G. Brück Electronic GmbH

Functions (Multi-sensors)

  • Sends lux values as required
  • Sends information on room occupancy and motion detection as required
  • Integrated follow-up time (hold time) for detection of room occupancy
  • Polling support
  • Adjustable weighting of the additional Ambient light measurement (PD2/4N only)
  • Sensitivity of PIR sensor adjustable
  • LED indication can be switched off

Downloads

DALI catalogue

BMS B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

BMS B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

BMS B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

BMS B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

BMS B.E.G. Brück Electronic GmbH

Local advice:

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us: