Prod.No. 93382 EAN: 4007529933822 PD2N-KNX-ST-FC
- Voltage: via KNX BUS
- Dimensions: FC= Ø 83 x 55 mm
- Typ. power input: 12 mA
- Features
- Description
- Accessories
- Downloads
Features
Designation | Value |
---|---|
Voltage | via KNX BUS |
Dimensions | FC= Ø 83 x 55 mm |
Typ. power input | 12 mA |
Detection area | horizontal 360° (Ceiling mounting) |
Range |
max. Ø 10 m across max. Ø 6 m towards max. Ø 4 m seated |
Monitored area (tangential movement) | 78 m² / 2.5 m mounting height |
Mounting height min./max./recommended | 2 m / 5 m / 2.5 m |
Degree / class of protection | FC= IP20 / Class III |
Ambient temperature | -25 °C to +55 °C |
Housing | polycarbonate, UV-resistant |
Number of light sensors | 2 |
Material color | white mat, similar to RAL9010 |
Number of PIR sensors | 1 |
KNX TP 256 | Yes |
Orientation light | 5 – 100 % / OFF / 1 min – 255 min |
Night light | 5 – 100 % |
Brightness set value | 5 – 2000 Lux |
Description
KNX occupancy detector with integrated KNX bus connector
Low installation depth
1 x Light (for regulating or switching), 1 x slave output, 3 separate HVAC-blocs
Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
Individual adaption of the PIR sensor sensitivity
Mixed light measurement with internal and external light sensor
Various locking functions
Status LEDs can be activated / deactivated
Programming button (phys. address) can be operated via remote control
Regulation/switching of three light groups via offset (external influence possible)
Short presence, self-adjusting follow-up time, corridor function
Recall of light scenes
HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
Detection area can be extended thanks to master-slave-mode
Extensive optimization options for light measurement
Measured light value is communicated to the bus
IR remote control-capable via IR remote control (optionally)
PIN code
Manual influence via external KNX push buttons possible
Function control (heartbeat, cyclical sending)
Forced switch-off
Intelligent central-off function
Premonition of switch-off
Behaviour upon bus voltage return definable at choice
Variable safety pause after switching off the lights
Settings ex ETS 4 for integration in KNX systems
The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
Adaption of dimming curve
Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
Burn-in function for fluorescent lamps selectable from 1h till 100h
Soft-start
Spring-clamps
Blinds
Application examples:
small offices, conference rooms, staircases, open-plan offices, classrooms/seminar rooms
Follow us: