DALI-2 multisensor (input device) for surface mounting in large mounting heights
DALI-2 certified product
Powered via DALI bus
External telescopic light sensor for a mounting height between 5 and 16 m (mechanically adjustable) for measuring the light according to the application.
Bright LED indication for commissioning
DALI multimaster technology according to IEC 62386 part 103
Instance 0 provides information regarding occupancy and movement for the DALI-Bus according to IEC 62386 part 303
Instance 1 provides LUX values for the DALI-Bus according to IEC 62386 part 304
Parameterisation is possible via mandatory Multimaster-Application-Controller of any manufacturer. This controller must support IEC 62386 parts 101/103/303/304.
Mixed light measurement with external light sensor
Detection area can be restricted with blinds
There are markings to ensure correct alignment during installation
When used in high-bay warehouses, care should be taken that, in the cross-aisles of the warehouse, detectors are installed that can detect movement only in the desired aisle locations, by using blinds or other technical arrangements.
Individual adaption of detection sensitivity for each PIR sensor
Status LEDs can be activated / deactivated

Voltage: via DALI Bus, max. 22.5 V DC
Dimensions: Ø 101 x 76 mm
Settings: via DALI-Bus and application which supports DALI multisensors according to IEC62386, parts 101, 103, 303 and 304
typ. power input: 7 mA
Detection area: horizontal 360° oval  (Ceiling mounting)
Range: 30 m x 19 m
Monitored area (tangential movement): 440 m² / 14 m mounting height
Mounting height min./max./recommended: 5 m / 16 m / 14 m
Degree / class of protection: IP54  / Class II
Impact strength: IK04
Measured light output: 0 - 4095 Lux, Mixed light measuring
Ambient temperature: -25 °C to +50 °C
Housing: polycarbonate, UV-resistant
Material color: white mat, similar to RAL9010


Manufacturer: B.E.G. Brück Electronic GmbH
Description: PD4-BMS-GH-SM DALI-2
Material color: white mat, similar to RAL9010
Item number: 93545
-