KNX occupancy detector with integrated KNX bus connector
When using the product database B.E.G._Praesenzmelder_928xx_V5.0, the following operation modes are available:
 1. Full automatic mode
 2. Semi-automatic mode
 3. Slave mode
 4. Occupancy-independent regulating mode
Detectors with firmware version 4 are not compatible with the new software.
The software is available for free download on the B.E.G. homepage. All detectors use the same software.
Up to three additional switching channels - selectively either daylight-depending or not
Set values and follow-up times can be changed for all channels using communication objects
Burn-in function with adjustable burn-in time from 1 to 100 hours
With activatable motion LED, deactivatable via ETS parameter, communication object or remote control
Settings via ETS 3 and 4
The product database for import into the ETS database can be downloaded from the B.E.G. homepage.

Voltage: via KNX BUS
Dimensions: Ø 80 x 84.5 mm
typ. power input: 7 mA
Detection area: horizontal 360°  (Ceiling mounting)
Range: max. Ø 10 m across, max. Ø 6 m towards, max. Ø 4 m seated
Monitored area (tangential movement): 78 m² / 2.5 m mounting height
Mounting height min./max./recommended: 2 m / 5 m / 2.5 m
Degree / class of protection: IP20  / Class II
Ambient temperature: -25 °C to +55 °C
Housing: polycarbonate, UV-resistant
Material color: white mat, similar to RAL9010
Brightness set value: 5 - 1200 Lux
 Mixed light measuring


Manufacturer: B.E.G. Brück Electronic GmbH
Description: PD2-KNX-FC
Material color: white mat, similar to RAL9010
Item number: 92881
-