SA 230 / 16 / H / KNX REG

Switching actuator for switching loads
DIN-rail mount device, width 72 mm (4TE, SA4 - 230 / 16 /) or 144 mm (8 TE, SA8 - 230 / 16 /) for mounting on a DIN-rail (TH35 EN 60715) for installation in a switch cabinet
The device has four (SA4 - 230 / 16 /) or eight (SA8 - 230 / 16 /) independant potential-free NO contacts
The switching contacts are optimised for capacitive loads
Manual switches for switching without bus tension
The switching actuator is powered by the KNX bus, no additional power supply required
Connection of the outputs is realised by means of screw terminals

Voltage:: via KNX BUS
Dimensions:: 90136= (4 TE) 90 x 72 x 64 mm
93336= (8 TE) 90 x 144 x 64 mm
typ. power input:: 5 mA typical
20 mA max.
Power consumption:: 0.15 W
Degree / class of protection:: 90136= IP20 / Class II
93336= IP20 / Class II
Ambient temperature:: -5 °C to +45 °C
KNX TP 256:: Yes
Connections and wires:: 0.2 ... 4.0 mm² rigid
0.25 ... 2.5 mm² fine-wired (with or without ferrule), USB
: Channel 1 to channel 4 or 8
Switching power:: 3680 W, cos φ = 1
max. inrush current Ip (150 µs) = 600 A
Type of contact:: µ-contacts, dry NO contact, (if N is connected, channel 1 is no longer potential-free and is used to determine the phase position)
Outputs:: 90136= 4 switching outputs
93336= 8 switching outputs