PD4-M-DALI/DSI-HVAC

Product Information

  • Occupancy detector with large detection area, daylight-dependent lighting control
  • DALI / DSI interface for control of digital dimmable electronic ballasts as a group
  • Switching between DALI and DSI programming possible with DIP switch and remote control
  • Additional potential-free switching channel for one of the following two functions:
    Cut-Off (complete ECG switch-off to avoid standby losses) or
    HVAC (for the energy-efficient control of heating, air-conditioning or ventilation systems or for displaying occupancy).

  • Alarm pulse: the detector triggers only when three movements are detected within 9 seconds
  • Orientation light function
  • Relay with tungsten pre-make contact, optimised for LED loads
  • Version as master device
  • Extension of the detection area with slave devices possible
  • Manual switching and dimming via push button possible
  • Additional functions can be set up using the optional remote control.
  • Avoidance of standby losses of the lighting system in accordance with EnEV DIN V 18599-4
  • Semi-automatic, full-automatic or twilight switch mode
  • Factory settings 10 min and 500 lux
  • Typical applications:
    monitoring of large areas like underground garages, gyms, warehouses, loading ramps, halls
Voltage:
110 – 240 V AC 50 / 60 Hz
Dimensions:
Ø 97 x 103 mm
Power consumption:
approx. 1 W
Detection area:
vertical 360°
Range:
max. Ø 24 m across
max. Ø 8 m towards
max. Ø 6.4 m seated
Monitored area (tangential movement):
450 m² / 2.5 m mounting height
Mounting height min./max./recommended:
2 m / 5 m / 2.5 m
Degree / class of protection:
IP20 / Class II
Ambient temperature:
-25 °C to +50 °C
Housing:
Polycarbonate, UV-resistant
Channel 1 (lighting control)
DALI output:
up to 50 DALI / DSI-EB
Follow-up time:
1 min – 30 min
Orientation light:
20 % / OFF / 5 min – 60 min / ∞
Brightness set value:
10 – 2000 Lux
Channel 2 (HVAC or lighting control, potential-free (dry))
Switching power:
2300 W, cos φ = 1
1150 VA, cos φ = 0.5
300 W LED
max. inrush current Ip (20 ms) = 165 A
max. inrush current Ip (200 µs) = 800 A
Type of contact:
1x µ-contact, dry NO contact with tungsten pre-make contact
Follow-up time:
5 min – 120 min, Alarm pulse, Pulse
Mixed light measuring
Description Colour Part number EAN number
PD4-M-DALI/DSI-HVAC-FC white mat, similar to RAL9010 92699 4007529926992
Generate Data sheet

Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Phone: 08708505412
E-Mail: info(@)beguk.co(.)uk
Contact form