93394 EAN: 4007529933945 RC-plus next N 230 KNX-DX
- Voltage: via KNX BUS
- Dimensions: 121 x 71 x 85 mm
- Typ. power input: 12 mA
- Features
- Description
- Accessories
- Downloads
Features
| Designation | Value |
|---|---|
| Voltage | via KNX BUS |
| Dimensions | 121 x 71 x 85 mm |
| Typ. power input | 12 mA |
| Detection area | horizontal 230° (Wall mounting) |
| Range |
max. 20 m across max. 6 m towards max. 4 m anti-creep protection |
| Monitored area (tangential movement) | 800 m² / 2.5 m mounting height |
| Mounting height min./max./recommended | 2 m / 5 m / 2.5 m |
| Degree / class of protection | IP54 / Class III |
| Impact strength | IK03 |
| Temperature measurement range | -20 °C to +45 °C |
| Ambient temperature | -25 °C to +55 °C |
| Housing | polycarbonate, UV-resistant |
| Number of light sensors | 1 |
| Material color | white, similar to RAL9010 |
| Number of PIR sensors | 3 |
| KNX TP 256 | Yes |
| Orientation light | 5 – 100 % / OFF / 1 min – 255 min |
| Night light | 5 – 100 % |
| Brightness set value | 5 – 2000 Lux |
Description
KNX occupancy detector with integrated KNX bus connector
1 x light output (for regulating or switching), 1 x slave output, 3 x HVAC outputs (separately programmable)
Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
Two logic modules
Individual adaption of detection sensitivity for each PIR sensor
Direction of movement can be identified
Anti-creep zone
Measuring of mixed light thanks to internal light sensor
Various locking functions
Status LEDs can be activated / deactivated
Programming button (phys. address) can be operated via remote control
Regulation/switching of three light groups via offset (external influence possible)
Short presence, self-adjusting follow-up time, corridor function
Recall of light scenes
Temperature sensor
Integrated downlight with orientation or a night light (RGB) function
HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
5 button remote control, programmable at choice (accessory)
Occupancy simulation
PIR sensors can be deactivated individually
Detection area can be extended thanks to master-slave-mode
Extensive optimization options for light measurement
Measured light value is communicated to the bus
IR remote control-capable via IR remote control (optionally)
PIN code
Manual influence via external KNX push buttons possible
Function control (heartbeat, cyclical sending)
Forced switch-off
Intelligent central-off function
Premonition of switch-off
Behaviour upon bus voltage return definable at choice
Variable safety pause after switching off the lights
Settings ex ETS 4 for integration in KNX systems
The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
Adaption of dimming curve
Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
Burn-in function for fluorescent lamps selectable from 1h till 100h
Soft-start
Faulty switching due to animals can be avoided by reducing the sensitivity
Blinds
Wall, ceiling and corner mounting
Application examples:
outdoor areas (entrances/access roads), parking areas, underground car parks, high-bay warehouse
Follow us: