SA 230 / 16 / H / KNX REG

Product Information

  • Switching actuator for switching loads
  • DIN-rail mount device, width 72 mm (4TE,  SA4 - 230 / 16 /) or 144 mm (8 TE, SA8 - 230 / 16 /) for mounting on a DIN-rail (TH35 EN 60715) for installation in a switch cabinet
  • The device has four (SA4 - 230 / 16 /) or eight (SA8 - 230 / 16 /) independant potential-free NO contacts
  • The switching contacts are optimised for capacitive loads
  • Manual switches for switching without bus tension
  • The switching actuator is powered by the KNX bus, no additional power supply required
  • Connection of the outputs is realised by means of screw terminals
Voltage:
via KNX BUS
Dimensions:
(4 (8) TE) 90 x 72 (144) x 64 mm
typ. power input:
5 mA typical
20 mA max.
Power consumption:
0,15 W
Degree / class of protection:
IP20 / Class II
Ambient temperature:
-5 °C to +45 °C
Connections and wires:
0,2 ... 4,0 mm² rigid
0,25 ... 2,5 mm² fine strand (with or without ferrules)
Channel 1 to channel 4 or 8
Switching power:
3680 W, cos φ = 1
max. inrush current IP (150 µs) = 600 A
Type of contact:
µ-contacts, dry NO contact, (when the neutral conductor is connected, channel 1 is no longer potential-free and the phase state can automatically be determined)
Outputs:
4 (SA4 - 230 / 16 /) or 8 (SA8 - 230 / 16 /) switching outputs
Description Colour Part number EAN number
SA4 - 230 / 16 / H / KNX REG grey 90136 4007529901364
SA8 - 230 / 16 / H / KNX REG grey 93336 4007529933365
Generate Data sheet
Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Telefon: +49 2266 901 210
E-Mail: info(@)beg(.)de
Contact form