PD4N-KNX-C-DX

Product Information

  • KNX occupancy detector designed for corridors, with integrated KNX bus connector
  • Low installation depth
  • 1x Light (for regulating or switching), 1x slave output, 3 separate HVAC-blocs
  • Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
  • Two logic modules
  • Individual adaption of detection sensitivity for each PIR sensor
  • Direction of movement can be identified
  • Adaption of dimming curve
  • Mixed light measurement with internal and external light sensor
  • Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
  • Burn-in function for fluorescent lamps selectable from 1h till 100h
  • Various locking functions
  • Status LEDs can be activated / deactivated
  • Programming button (phys. address) can be operated via remote control
  • Regulation/switching of three light groups via offset (external influence possible)
  • Short presence, self-adjusting follow-up time, corridor function
  • Soft-start
  • Recall of light scenes
  • ​​Temperature- and noise sensor
  • HVAC mode (1=comfort, 2=stand-by, 3=economy, 4 = antifreeze/heat protection)
  • IR remote control-capable via 5 button remote control, programmable at choice (accessory)
  • Occupancy simulation
  • PIR sensors can be deactivated individually
  • Detection area can be extended thanks to master-slave-mode
  • Extensive optimization options for light measurement
  • Measured light value is communicated to the bus
  • IR remote control-capable via IR remote control (optionally)
  • PIN code
  • Manual influence via external KNX push buttons possible
  • Function control (heartbeat, cyclical sending)
  • Forced switch-off
  • Intelligent central-off function
  • Premonition of switch-off
  • Behaviour upon bus voltage return definable at choice
  • Variable safety pause after switching off the lights
  • Settings ex ETS 4 for integration in KNX systems
  • The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
  • There are markings for adjusting the detector
  • Spring-clamps
  • Blinds
  • Typical application:
    monitoring of long corridors
Voltage:
via KNX BUS
Dimensions:
FC= Ø 106 x 68 mm
FM= Ø 106 x 55 mm
typ. power input:
12 mA
Detection area:
vertical 360°
Range:
max. Ø 40 m across
max. Ø 20 m towards
Monitored area (tangential movement):
250 m² / 2,5 m Mounting height
Mounting height min./max./recommended:
2,4 m / 2,6 m / 2,5 m
Degree / class of protection:
FC= IP20 / Class III
FM= IP20 / Class III
Temperature measurement range:
-5 °C to +45 °C
Ambient temperature:
-25 °C to +55 °C
Housing:
Polycarbonate, UV-resistant
Number of light sensors:
2
Number of PIR sensors:
4
Orientation light:
5 - 100 % / OFF / 1 min - 255 min
Night light:
5 - 100 %
Brightness set value:
5 - 2000 Lux
Description Colour Part number EAN number
PD4N-KNX-C-DX-FC white 93388 4007529933884
PD4N-KNX-C-DX-FM white 93389 4007529933891
Generate Data sheet
Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Telefon: +49 2266 901 210
E-Mail: info(@)beg(.)de
Contact form