CdS-DIM

Product Information

  • Remote controllable, photo electric switch with ability to dim, for ceiling mounting
  • Illumination can be dimmed to a desired brightness value.
  • Actual light value can be read and delay time can be set using the optional infrared remote control
  • For connection of up to 50 EB
  • Constant light regulation
  • Dynamic switch-on delay
  • Relay with tungsten pre-make contact, optimised for LED loads
  • Avoidance of standby losses of the lighting system in accordance with EnEV DIN V 18599-4
  • Application examples: ideal for entrance areas, staircases, halls where permanent light is required
Voltage:
110 – 240 V AC 50 / 60 Hz
Dimensions:
Ø 80 x 75 mm
Power consumption:
< 1 W
Degree / class of protection:
IP20 / Class II
Ambient temperature:
-25 °C to +50 °C
Housing:
Polycarbonate, UV-resistant
Channel 1 (lighting control)
Switching power:
2300 W, cos φ = 1
1150 VA, cos φ = 0,5
max. inrush current IP (20 ms) = 165 A
max. inrush current IP (200 µs) = 800 A
Type of contact:
1x µ-contact, NO contact with tungsten pre-make contact
DIM output:
1-10 V DC, up to 50 ballasts
Switch-on delay:
determined automatically
Switch-off delay:
1 min - 30 min
Brightness set value:
10 – 2000 Lux
Description Colour Part number EAN number
CdS-DIM-FC white mat, similar to RAL9010 92589 4007529925896
Generate Data sheet

Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Telefon: +49 2266 901 210
E-Mail: info(@)beg(.)de
Contact form