PD4-M-1C-C-PS

Product Information

  • Occupancy detector with NO contact and safety circuit by NC contact
  • Guarantees illumination even if sensor fails
  • Designed for corridors
  • Version as master device
  • Detection area can be extended with slave devices
  • Manual switching via push-button possible
  • Additional functions can be set up using the optional remote control.
  • Factory settings 10 min and 500 lux
  • There are markings to ensure correct alignment during installation
  • Typical application:
    monitoring of long corridors
Voltage:
110 – 240 V AC 50 / 60 Hz
Dimensions:
FC= Ø 97 x 103 mm
SM= Ø 101 x 76 mm
Power consumption:
approx. 0,7 W
Detection area:
vertical 360°
Range:
max. 40 m x 5 m across
max. 20 m x 3 m towards
Monitored area (tangential movement):
250 m² / 2,5 m mounting height
Mounting height min./max./recommended:
2,4 m / 2,6 m / 2,5 m
Degree / class of protection:
FC= IP20 / Class II
SM= IP54 / Class II
Ambient temperature:
-25 °C to +50 °C
Housing:
Polycarbonate, UV-resistant
Channel 1 (lighting control)
Switching power:
2300 W, cos φ = 1
1150 VA, cos φ = 0,5
300 W LED
max. inrush current Ip (20 ms) = 120 A
Type of contact:
1x µ-contact, NO contact with tungsten pre-make contact, additional NC-safety contact
Follow-up time:
15 sec – 30 min, Pulse
Switch-on threshold:
10 – 2000 Lux
Mixed light measuring
Description Colour Part number EAN number
PD4-M-1C-C-PS-FC white mat, similar to RAL9010 92480 4007529924806
PD4-M-1C-C-PS-SM white mat, similar to RAL9010 92485 4007529924851
Generate Data sheet

Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Telefon: +49 2266 901 210
E-Mail: info(@)beg(.)de
Contact form