DALI-LINK multiroom solution

Scene control for small offices, set consists of a DALI-LINK power supply, a PD11 DALI-LINK multisensor and a DALI-LINK 4-way pushbutton interface with built-in Bluetooth gateway. The super-flat PD11 is the first choice for the most demanding architectural considerations, with a large detection range and small size.

Unlike other systems, the DALI-LINK PD11 is not only a multisensor but also a master occupancy detector with its own intelligence as a controller. Therefore B.E.G. DALI-LINK is a fail-safe, expandable and economical system. All components are also available individually, so that larger rooms such as conference rooms and classrooms can be covered.

DALI-LINK Products

DALI-LINK Bluetooth pushbutton interface

Can be combined with all 4-way switches or scene from major manufacturers.

DALI-LINK multisensor PD11

Super-flat occupancy detector with a range of 9m.

DALI-LINK Bluetooth app

Programming can be carried out directly from your smartphone.

DALI-LINK Power supply

Short circuit detection and overheat protection.

STARTERSET-DALI-LINK-SMALL-OFFICE

For the launch all three DALI-LINK components (Bluetooth pushbutton interface, multi-sensor PD11 and power supply) are available in a practical starter box.

Bluetooth app

Set up settings and scenes

The B.E.G. Bluetooth app contains a protected area with which the installer can set up the DALI-LINK component parameters.
All devices and their options can automatically be polled and displayed in the app.
Standard scenes can be used, or custom scenes created and applied.
The lighting can be switched and dimmed as required and scenes can be activated.

Advantages of DALI multiroom installation

Controllable from any smartphone
Using the DALI-LINK Bluetooth app, a user with a smartphone can control room lighting and scene selection individually.

Guided Light
Additional DALI multisensors can be installed not only as slave units, but also for “Guided Light”. Adjacent areas are then maintained at comfortable orientation light levels.

Simple lighting regulation
The definition of two lighting groups (DUO function) with offset function using continuous DALI wiring can be carried out quickly and directly for each multisensor via the programming.

Demanding design requirements
The super-flat PD11 means there is now a design-oriented DALI room solution.

Expandable
A maximum of 25 DALI lights and 6 control devices (multimasters
or pushbutton interfaces) can be connected to the power supply. The number of usable devices can be doubled by using another DALI-LINK power supply.

4 pushbutton inputs
All pushbutton inputs can be freely configured to control lighting groups or access scenes.

Orientation light
The “orientation light” function can be activated, and operates after the follow-up time previously configured. It limits the maximum dimming level of connected lights to an adjustable value. This means that safety-relevant areas are never completely dark, but energy is still saved compared to full illumination.

Lighting scenes
Up to 16 lighting scenes can be programmed. The scenes can be accessed by a pushbutton or via the DALI-LINK Bluetooth app.