PD9-KNX-GH-DX

Product Information

  • KNX mini occupancy detector with integrated KNX bus connector, especially for large mounting heights
  • 1 x Light (for regulating or switching), 1 x slave output, 3 separate HVAC-blocs
  • Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
  • Two logic modules
  • Individual adaption of the PIR sensor sensitivity
  • Measuring of mixed light thanks to internal light sensor
  • Various locking functions
  • Status LEDs can be activated / deactivated
  • Programming button (phys. address) can be operated via remote control
  • Regulation/switching of three light groups via offset (external influence possible)
  • Short presence, self-adjusting follow-up time, corridor function
  • Recall of light scenes
  • Temperature sensor
  • Light regulation feasible up to 5 m mounting height
  • HVAC mode (1=comfort, 2=stand-by, 3=economy, 4 = antifreeze/heat protection)
  • 5 button remote control, programmable at choice (accessory)
  • Occupancy simulation
  • Detection area can be extended thanks to master-slave-mode
  • Extensive optimization options for light measurement
  • Measured light value is communicated to the bus
  • IR remote control-capable via IR remote control (optionally)
  • PIN code
  • Manual influence via external KNX push buttons possible
  • Function control (heartbeat, cyclical sending)
  • Forced switch-off
  • Intelligent central-off function
  • Premonition of switch-off
  • Behaviour upon bus voltage return definable at choice
  • Variable safety pause after switching off the lights
  • Settings ex ETS 4 for integration in KNX systems
  • The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
  • Adaption of dimming curve
  • Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
  • Burn-in function for fluorescent lamps selectable from 1h till 100h
  • Soft-start
  • Spring clips for quick and easy installation in suspended ceilings
  • Clip ring for installation in lights and blind included
  • Typical application: Monitoring of industry halls and staircases
Voltage:
via KNX BUS
Dimensions:
Sensor head: Ø 45 x 40 mm, Power supply: 129 x 29 x 22 mm
typ. power input:
12 mA
Detection area:
horizontal 360° (Ceiling mounting)
Range:
max. Ø 3,5 m across
Monitored area (tangential movement):
9 m² / 6 m mounting height
Mounting height min./max./recommended:
5 m / 10 m / 6 m
Degree / class of protection:
IP20 / Class III
Temperature measurement range:
-5 °C to +45 °C
Ambient temperature:
-25 °C to +55 °C
Housing:
Polycarbonate, UV-resistant
Number of light sensors:
1
Number of PIR sensors:
1
KNX TP 256:
Yes
Cable length:
45 cm
Orientation light:
5 – 100 % / OFF / 1 min – 255 min
Night light:
5 – 100 %
Brightness set value:
5 – 2000 Lux
Description Colour Part number EAN number
PD9-KNX-GH-DX-FC white mat, similar to RAL9010 93391 4007529933914
Generate Data sheet

Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Telefon: +971-56-2088488
E-Mail: lijo.jacob(@)beg(.)ae
Contact form