PD5-M-DIM-Clip

Product Information

    Discontinued product

  • Occupancy detector for use with T5 and T8 fluorescent lamps for daylight-dependent lighting control
  • 1 – 10 V interface for control of dimmable electronic ballast
  • Orientation light function
  • Additional switching channel for the following function:
    Cut-Off (complete ECG switch-off to avoid standby losses).
  • Manual switching and dimming via push button possible
  • Version as master device
  • Detection area can be extended with slave devices
  • Additional functions can be set up using the optional remote control.
  • Relay with tungsten pre-make contact, optimised for LED loads
  • Avoidance of standby losses of the lighting system in accordance with EnEV DIN V 18599-4
  • Typical applications:
    Offices, conference rooms, schools, nursery schools, hospitals
Voltage:
230 V AC +/- 10% 50 / 60 Hz
Dimensions:
92 x 60 x 73 mm
Power consumption:
approx. 1,6 W
Detection area:
horizontal 360° (Ceiling mounting)
Range:
max. Ø 10 m across
max. Ø 6 m towards
max. Ø 4 m seated
Monitored area (tangential movement):
78 m² / 2,5 m mounting height
Mounting height min./max./recommended:
2 m / 5 m / 2,5 m
Degree / class of protection:
IP20 / Class II
Ambient temperature:
-25 °C to +50 °C
Housing:
Polycarbonate, UV-resistant
Cable length:
90 cm
Channel 1 (lighting control)
Switching power:
2300 W, cos φ = 1
1150 VA, cos φ = 0,5
300 W LED
max. inrush current Ip (20 ms) = 165 A
max. inrush current Ip (200 µs) = 800 A
Type of contact:
1x µ-contact, NO contact with tungsten pre-make contact
DIM output:
1-10 V DC, up to 50 ballasts
Follow-up time:
1 min – 30 min
Brightness set value:
10 – 2000 Lux
Mixed light measuring
Description Colour Part number EAN number
PD5-M-DIM-Clip white mat, similar to RAL9010 92310 4007529923106
Generate Data sheet

Local advice

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

Telefon: +971-56-2088488
E-Mail: lijo.jacob(@)beg(.)ae
Contact form